Copper tube and pipe for HVAC, refrigeration and industry
Copper tube for air conditioning and refrigeration to EN 12735 and ASTM B280, in 1/4" to 3/4" outside diameter with 0.61–0.81 mm wall, supplied in pancake coils or straight lengths, clean and dry inside. Copper-nickel tube and solid copper rod available alongside.
Copper tube is bought by outside diameter, wall thickness and temper, because those three decide the working pressure and whether the tube can be bent on site. Air-conditioning and refrigeration tube (ACR) is supplied soft and capped in pancake coils so the bore stays dry and clean; plumbing and industrial tube is supplied in straight lengths in hard temper. Phosphorus-deoxidised copper (C12200 / TP2) is the normal choice for brazed and welded joints.
Copper Tube: sizes and supply condition
| Outside diameter (ACR) | 1/8" to 1-1/8" and above, to ASTM B280 — full table below |
|---|---|
| Wall thickness (ACR) | Confirmed per order against the working pressure; 0.61 / 0.71 / 0.81 mm quoted most often |
| Metric tube | 15 / 20 / 25 mm OD quoted on request |
| Temper | Soft (annealed) coil, half-hard, hard straight length |
| Condition | Blank inside, clean and dry, ends capped |
| Packing | Carton or wooden case, coil or straight bundle |
Ranges are typical trade values. The exact size, tolerance and condition are confirmed on the quotation, and the mill certificate states what was actually supplied.
| Outside diameter (inch) | Metric equivalent (mm) | Supply form |
|---|---|---|
| 1/8" | 3.18 | Pancake coil |
| 3/16" | 4.76 | Pancake coil |
| 1/4" | 6.35 | Pancake coil |
| 5/16" | 7.94 | Pancake coil |
| 3/8" | 9.52 | Pancake coil |
| 1/2" | 12.70 | Pancake coil |
| 5/8" | 15.88 | Pancake coil |
| 3/4" | 19.05 | Pancake coil |
| 7/8" | 22.23 | Pancake coil |
| 1-1/8" | 28.58 | Coil or straight length |
| Above 1-1/8" | Quoted per order | Straight length or coil on request |
Coil outside diameters are identified in inches under ASTM B280; the metric values are conversions for reference. Wall thickness is specified separately because it sets the working pressure.
Grades supplied in this form
| Grade | UNS | EN | Typical service |
|---|---|---|---|
| C12200 (TP2) | C12200 | Cu-DHP | ACR, refrigeration, plumbing — brazes and welds well |
| C11000 (T2) | C11000 | Cu-ETP | Electrical, busbar, high-conductivity work |
| C70600 (90/10 Cu-Ni) | C70600 | CuNi10Fe1Mn | Sea-water and marine piping |
Standards quoted against
- EN 12735-1
- ASTM B280 (ACR)
- ASTM B88 (water)
- DIN 8905
- GB/T 17791
- ASTM B111 (cupronickel)
3 copper tube specifications
Each page carries the grade, standard, finish and size range for that item, with a mill certificate on every shipment.
C12200 copper coil for air conditioner, 1/8"–1-1/8"
EN 12735-1 / ASTM B280 · clean and dry, capped
View specification
Copper tube 15 / 20 / 25 mm — C12200 and Cu-Ni
EN 12735-1 · mill finish, bright annealed on request
View specification
Copper round bar 12 mm — TP1 / TP2
ASTM B187 / GB/T 4423 · mill finish, drawn
View specificationWhere it is used
- Split and VRF air conditioning
- Commercial refrigeration
- Heat exchangers
- Chiller pipework
- Marine piping
Copper Tube FAQ
What does TP2 mean on a copper tube order?
TP2 is the Chinese designation for phosphorus-deoxidised copper, equivalent to C12200 / Cu-DHP. It is the standard choice for air-conditioning and refrigeration tube because the deoxidation prevents hydrogen embrittlement during brazing.
Is the tube capped and dry inside?
Yes. ACR tube is supplied blank inside, clean and dry with capped ends, which is the condition refrigeration installers require to keep moisture and swarf out of the circuit.
Coil or straight length?
Pancake coils in soft temper for installation work where the tube is bent on site; straight lengths in hard temper for construction and industrial pipework. State the temper and length when you inquire.
Can you supply copper-nickel tube?
Yes — 90/10 cupronickel (C70600) is quoted for sea-water and marine piping, where its resistance to flowing seawater is the deciding factor.
Quote copper tube against your specification
Send grade, size, quantity and any certificate requirement. Reply within 24 hours, Monday to Saturday. Free samples available.
Other product forms
Stainless is supplied in six forms; grades are shared across them.