Stainless steel coil and strip
Cold-rolled coil and slit strip in 304/304L, 316L, 321 and 430, supplied eye-to-sky or eye-to-wall, slit to width for roll forming, stamping and welded tube production.
Coil is bought by weight, but specified by width, thickness, temper and coil weight, because those four decide whether the coil runs on your line. Slit strip adds burr height to the specification; welded tube producers usually care about it more than about price.
Coil & Strip: sizes and supply condition
| Thickness | Typical trade range 0.3–3.0 mm |
|---|---|
| Width | 1000 / 1219 / 1500 mm; slit to width on request |
| Inner diameter | 508 mm standard; other on request |
| Coil weight | Quoted per order — confirm crane and line limits |
| Packing | Eye-to-sky or eye-to-wall, strapped, edge-protected |
Ranges are typical trade values. The exact size, tolerance and condition are confirmed on the quotation, and the mill certificate states what was actually supplied.
Grades supplied in this form
| Grade | UNS | EN | Typical service |
|---|---|---|---|
| 304 / 304L | S30400 / S30403 | 1.4301 / 1.4307 | Roll forming, stamping, kitchenware |
| 316L | S31603 | 1.4404 | Welded tube, marine and chemical equipment |
| 321 | S32100 | 1.4541 | Elevated-temperature formed parts |
| 430 | S43000 | 1.4016 | Appliance panels, low-cost decorative work |
Standards quoted against
- ASTM A240 / A240M
- ASTM A480
- EN 10088-2
- JIS G4305
6 coil & strip specifications
Each page carries the grade, standard, finish and size range for that item, with a mill certificate on every shipment.
301L stainless steel coil
Specification on request · bright annealed
View specification
304 stainless steel coil, EN 1.4301
EN 1.4301
View specification
304L stainless steel strip, JIS SUS304
JIS SUS304 · 2B, BA, HL
View specification
321 stainless steel coil, EN 1.4541
EN 1.4541
View specification
316L stainless steel coil, ASTM A240
ASTM A240 · pickled
View specification
301 stainless steel coil
Specification on request · 2B
View specificationWhere it is used
- Welded tube production
- Kitchenware and sinks
- Appliance panels
- Roll-formed profiles
- Automotive trim
Coil & Strip FAQ
Eye-to-sky or eye-to-wall — which do I need?
Eye-to-sky stands the coil on its edge with the bore vertical, which suits most uncoilers and slitting lines. Eye-to-wall lays the coil with the bore horizontal, which suits some cut-to-length lines and saves height in the container. Tell us your uncoiler type and we quote the matching orientation.
Can you supply slit strip to my width?
Yes, with the burr limit agreed on the order, because burr height affects downstream tooling and edge quality on welded tube.
What coil weight can you supply?
Coil weight is quoted per order against your crane capacity and line limits. State the maximum weight your uncoiler and crane can handle and we will match it.
Quote coil & strip against your specification
Send grade, size, quantity and any certificate requirement. Reply within 24 hours, Monday to Saturday. Free samples available.
Other product forms
Stainless is supplied in six forms; grades are shared across them.