Steel buying guides
Practical guides written for buyers rather than for search engines: how to choose a stainless grade, how to verify a supplier, and how surface finishes are actually specified. Each guide is reviewed against the standards it references.
9 guides
Grade selection
Stainless Steel Grades Explained: 304, 316L, 321, 310S and 904L
Most stainless steel specification mistakes come from choosing a grade by habit rather than by environment. This guide explains wh…
Buying process
How to Verify a Stainless Steel Supplier: A Nine-Point Checklist
Most stainless steel import problems are not metallurgical — they are documentary. A supplier can ship the right grade with the wr…
Specification
Stainless Steel Surface Finishes: 2B, BA, No.4, HL and 8K
The finish on a stainless steel sheet decides how it looks, how it cleans and how much it costs — and it is the specification most…
Pipe and tube
Stainless Steel Pipe: Seamless vs Welded, Wall Thickness and Standards
Most stainless pipe disputes are not about grade — they are about wall thickness and standard. This guide explains what each produ…
Sheet and plate
Stainless Steel Sheet and Plate: Thickness Tolerance, Finish and Flatness
Thickness tolerance, surface finish and flatness are what separate a sheet that runs on a laser from one that does not — and none …
Coil and strip
Stainless Steel Coil and Slit Strip: Width, Temper, Burr and Coil Weight
Coil is bought by weight but specified by width, thickness, temper and coil weight. Get any of the four wrong and the coil becomes…
Bar and rod
Stainless Steel Bar: Condition, Tolerance Class and Machinability
Two bars of the same grade can machine at wildly different rates depending on condition and tolerance class. This guide explains t…
Angle bar
Stainless Steel Angle: Hot Rolled vs Cold Formed, and Welding Distortion
Stainless angle is a small product with a large failure mode: distortion after welding. The choice between hot-rolled and cold-for…
Profiles
Stainless Steel Profiles: What a Section Drawing Must Contain
A profile is defined entirely by its drawing. Unlike pipe or sheet, there is no standard table to fall back on, so an incomplete d…
Question not covered?
Send it to the sales desk. Answers that help other buyers get published as a guide.