Stainless steel equal and unequal angle bar
Equal and unequal stainless steel angle in 304/304L and 316L, hot rolled or cold formed, for structural frames, supports, cladding sub-structures and marine fabrication.
Stainless angle is specified by leg length, leg thickness and length, and by whether the legs are equal. Cold-formed angle has sharper corners and tighter tolerances; hot-rolled angle is heavier and cheaper per tonne for structural work. Welded stainless structures usually specify 304L or 316L to protect the heat-affected zone.
Angle Bar: sizes and supply condition
| Equal angle legs | Typical trade range 20 × 20 mm to 100 × 100 mm |
|---|---|
| Leg thickness | 3–10 mm typical; confirm on quotation |
| Unequal angle | Quoted per order |
| Length | 6 m standard / cut to length |
| Condition | Hot rolled, pickled, cold formed |
Ranges are typical trade values. The exact size, tolerance and condition are confirmed on the quotation, and the mill certificate states what was actually supplied.
Grades supplied in this form
| Grade | UNS | EN | Typical service |
|---|---|---|---|
| 304 / 304L | S30400 / S30403 | 1.4301 / 1.4307 | General structural and frame work |
| 316 / 316L | S31600 / S31603 | 1.4401 / 1.4404 | Marine and coastal structures |
Standards quoted against
- ASTM A276 (bar stock)
- EN 10056 (dimensions)
- EN 10088-3
- JIS G4303
2 angle bar specifications
Each page carries the grade, standard, finish and size range for that item, with a mill certificate on every shipment.
Where it is used
- Structural frames
- Cladding sub-structures
- Handrail supports
- Marine platforms
- Equipment skids
Angle Bar FAQ
Hot rolled or cold formed angle?
Cold-formed angle gives sharper corners, better dimensional consistency and a cleaner surface, which suits visible architectural work. Hot-rolled angle is heavier, cheaper per tonne and preferred for structural frames where appearance is secondary.
Can angle be supplied in 316L for a marine project?
Yes. 316L is the normal selection for marine and coastal structures because its molybdenum content resists pitting in chloride environments.
Quote angle bar against your specification
Send grade, size, quantity and any certificate requirement. Reply within 24 hours, Monday to Saturday. Free samples available.
Other product forms
Stainless is supplied in six forms; grades are shared across them.