Stainless steel sheet and plate
Cold-rolled sheet from 0.3 mm and hot-rolled plate to 100 mm, in 304/304L, 316/316L, 321, 310S and 904L, to ASTM A240 and EN 10088-2. Finishes 2B, BA, No.4, hairline and 8K mirror, cut to size on request.
Sheet and plate are the highest-volume stainless products in most export orders. The difference between the two is thickness and mill route: sheet is cold rolled and supplied in 2B or BA, plate is hot rolled and supplied No.1, often further processed. Finish, flatness and edge condition decide whether a sheet is usable on a laser or press-brake line.
Sheet & Plate: sizes and supply condition
| Cold-rolled sheet thickness | 0.4–3.0 mm |
|---|---|
| Hot-rolled plate thickness | 3.0–40 mm |
| Width | 1000 / 1219 / 1500 mm; slit to width on request |
| Length | 2000 / 2438 / 3000 mm; cut to length on request |
| Finish | No.1, 2B, BA, No.4, hairline, 8K mirror, embossed |
Ranges are typical trade values. The exact size, tolerance and condition are confirmed on the quotation, and the mill certificate states what was actually supplied.
| Grade | Thickness | Width | Length | Finish |
|---|---|---|---|---|
| 304 / S30408 cold rolled | 0.6–3.0 mm | 1000 / 1219 / 1500 mm | 2000 / 2438 / 3000 mm / coil | 2B |
| 304 / S30408 hot rolled | 4.0–18.0 mm | up to 3,000 mm, cut to size | cut to length | No.1 |
| 304L | 3.0–16.0 mm | 1219 / 1500 mm | 2438 / 3000 / 3600 mm | 2B, No.1 |
| 316L | 0.4–3.0 mm | 1000 / 1219 / 1500 mm | 2000 / 2438 / 3000 mm | 2B |
| 310S | 0.5–40.0 mm | 1219 / 1250 / 1500 mm | 2438 / 3000 / 6000 mm | 2B, No.1 |
| 321 | 3.0–16.0 mm | 1500 mm | 3000 mm | No.1 |
Grades supplied in this form
| Grade | UNS | EN | Typical service |
|---|---|---|---|
| 304 / 304L | S30400 / S30403 | 1.4301 / 1.4307 | General fabrication, food contact, architecture |
| 316 / 316L | S31600 / S31603 | 1.4401 / 1.4404 | Coastal, marine, chemical, pharmaceutical |
| 321 | S32100 | 1.4541 | Elevated-temperature welded fabrications |
| 310S | S31008 | 1.4845 | Furnace and kiln components |
| 904L | N08904 | 1.4539 | Aggressive acid service |
Standards quoted against
- ASTM A240 / A240M
- ASTM A480 (flatness and finish)
- EN 10088-2
- JIS G4304 / G4305
6 sheet & plate specifications
Each page carries the grade, standard, finish and size range for that item, with a mill certificate on every shipment.
304 stainless steel sheet
Specification on request · embossed
View specification
304 stainless steel plate — 2000 × 4000 mm, EN 1.4301
EN 1.4301 · pickled
View specification
316L stainless steel plate, JIS SUS316L
JIS SUS316L · embossed
View specification
430 stainless steel plate — 0.3–3.0 mm
Specification on request · 2B, BA, No.4, HL
View specification
304L stainless steel sheet, ASTM A240
ASTM A240 · 2B, BA, No.4
View specification
201 stainless steel sheet
Specification on request · 2B, BA, 8K mirror
View specificationWhere it is used
- Tanks and vessels
- Architectural cladding
- Kitchen equipment
- Machinery guards
- Medical furniture
Sheet & Plate FAQ
What is the difference between 2B and BA finish?
2B is cold rolled, annealed, pickled and skin-passed, giving a smooth grey surface — the default for fabrication. BA is bright annealed in a controlled atmosphere, giving a more reflective surface without pickling, used where appearance and cleanability matter.
Can plate be cut to my dimensions?
Yes. Cut-to-length and cut-to-width are quoted with the tolerance and packing method stated on the quotation. Send the drawing dimensions and quantity.
Is 304 or 316L the right choice for a coastal site?
316L, because its molybdenum content raises resistance to pitting in chlorides. 304 will usually tea-stain in coastal air and can pit in splash zones.
Quote sheet & plate against your specification
Send grade, size, quantity and any certificate requirement. Reply within 24 hours, Monday to Saturday. Free samples available.
Other product forms
Stainless is supplied in six forms; grades are shared across them.