Stainless steel profiles and sections
Stainless steel channels, sections and custom profiles in 304/304L and 316L, produced to drawing for architectural, equipment and marine fabrication.
Profiles are the least standardised stainless product: a channel section follows a published dimension table, but a custom profile is defined entirely by the drawing. The specification therefore has to include the section drawing, the tolerance on each dimension, the finish on visible faces and the straightness limit.
Profiles: sizes and supply condition
| Channel and section | Quoted against the standard dimension table or drawing |
|---|---|
| Custom profile | Produced to drawing; tooling lead time applies |
| Length | 6 m standard / cut to length |
| Finish | Pickled, brushed, polished on visible faces |
Ranges are typical trade values. The exact size, tolerance and condition are confirmed on the quotation, and the mill certificate states what was actually supplied.
Grades supplied in this form
| Grade | UNS | EN | Typical service |
|---|---|---|---|
| 304 / 304L | S30400 / S30403 | 1.4301 / 1.4307 | Architectural and equipment sections |
| 316 / 316L | S31600 / S31603 | 1.4401 / 1.4404 | Marine and chemical environments |
Standards quoted against
- EN 10088-3
- ASTM A276 (stock for machining)
- Customer drawing
Sections produced to drawing
This form is quoted against the section drawing rather than from a stock list. Send the drawing and we will confirm tooling, tolerance and lead time.
Send a drawingWhere it is used
- Architectural sections
- Equipment frames
- Marine fabrication
- Window and façade systems
- Conveyor guides
Profiles FAQ
Can you produce a profile from my drawing?
Yes, custom profiles are quoted against the section drawing, with the tolerance on each dimension, the finish on visible faces and the straightness limit stated on the quotation. Tooling lead time applies to non-standard sections.
What should a profile inquiry include?
The section drawing in DWG or PDF, the grade, the length, the quantity, the finish on visible faces and the straightness requirement. Without the drawing the section cannot be quoted accurately.
Quote profiles against your specification
Send grade, size, quantity and any certificate requirement. Reply within 24 hours, Monday to Saturday. Free samples available.
Other product forms
Stainless is supplied in six forms; grades are shared across them.